License Verification This chapter provides information about verifying the Cisco IOS license level, viewing the Cisco ASR 1001-HX Router or Cisco ASR 1002-HX Router license, and configuring the port license and crypto throughput level. Viewing the Cisco IOS License Level Use the show version command to determine the Cisco IOS license level in the router.
For example: Router# show version. License Level: adventerprise License Type: RightToUse Next reload license Level: adventerprise. Table 1 show version Command Output Description Field Name Description License Level: adventerprise Indicates the current Cisco IOS license code level. License Type: RightToUse Indicates the type of license that is used. This example shows that the Right-to-Use license is used, which means that the purchase of a license is required. Other license types could be: Permanent (purchased) license or an Evaluation 60-day license.
Cisco Asr 1001-x Ipsec License
Next reload license Level: adventerprise Indicates the startup configuration definition that will be used for the next reload instance. Use the show running-config command or the show startup-config command to view the license-level information. The following example displays sample output from the show running-config command: Router# show running-config.
License boot level adventerprise. Table 2 show running-config Command Output Description Field Name Description license boot level adventerprise Indicates the current requested Cisco lOS license level to boot. Viewing License Information Use the show license udi command to determine the Universal Device Identifier (UDI) information of your chassis. This may be required at the time of purchasing a new license.
The following example displays sample output from the show license udi command: Router# show license udi SlotID PID SN UDI -. ASR1002-HX JAE1931098U ASR1002-HX:JAE1931098U Use the show license all command to display all the applicable licenses in both Primary License Storage and Built In License Storage. Note Primary License Storage stores the currently purchased and installed licenses.
Hello, Try as I might I cant find a document that says; 'How to activate encryption on an ASR 1001' or 'activating ip advanced features' on the ASR 1001. Can anyone help please. Cisco ASR1001 System,Crypto, 4 built-in GE, Dual P/S Cisco ASR1001 4GB DRAM Cisco ASR 1000 Advanced IP Services License Cisco ASR 1001 IOS XE - ENCRYPTION UNIVERSAL IPSEC License for ASR1000 Series Upgrade from 2.5 Gbps to 5Gbps License for ASR 1001 Whats the process to activate the 2.5gbps to 5gbps feature or encryption? Thanks Chris. Chris, All Cisco ASR 1000 feature licenses are honor-based; that is, they are not enforced through a Product Activation Key (PAK) with the exception of the 'technology package licenses' and the performance upgrade license (from 2.5 to 5 Gbps) on the Cisco ASR 1001 models. What are the key new items introduced with the Cisco ASR 1001 chassis compared to the other ASR 1000 Series routers?
The Cisco ASR 1001 Series introduces the concept of the integrated daughter card (IDC) which is a non-field upgradeable component on the ASR 1001 chassis to provide enhanced (I/O) capabilities. At the time of first customer ship (FCS), the Cisco ASR 1001 comes in 3 different versions: The ASR 1001 base chassis (Part number ASR1001), the ASR1001-2XOC3POS chassis with an integrated daughter card with 2 OC3 POS ports and the ASR1001-4XT3 with an integrated daughter card with 4 T3 ports. The second phase of the ASR 1001 launched a further 3 chassis: the ASR1001-HDD with built in 160GB hard drive; the ASR1001-4X1GE with an integrated daughter card providing 4 1GE ports; and the ASR1001-8XCHT1E1 with an integrated daughter card providing 8 channelized T1/E1 ports.
Further, the Cisco ASR 1001 is the first chassis of the Cisco ASR 1000 Series which implements the software activation which is the same software activation concept as seen on other Cisco offerings, e.g. On the Cisco ISR G2 router Series. At FCS, 2 different type of licenses will be enforced via software activation. Firstly, the feature sets offered through the IP Base (K9 and non-K9), Advanced IP Services (K9 and non-K9) and Advanced Enterprise Services (K9 and non-K9).
Secondly, the upgrade from the default performance of 2.5-Gbps to 5-Gbps can be accomplished via a software activated performance upgrade license (part number to be used at time of ordering any of the three ASR1001 chassis for the performance upgrade to 5-Gbps is FLS-ASR1001-5G). Other functionality such as firewall, encryption is planned to be software activated on the ASR 1001 in the future.
How to activate a license once you have a PAK (Product Authorization Key): 1. Type the PAK you received on the form and submit it; 3. Activate the license on the ASR1000. FAQ on For software activation commands, go to: HTH. Cheers, Gustavo. Thanks very much, that sums up what I have found however I am back to the same question.
I understand the licencing I think, so how when faced with a console do you enable such features OR do you buy the kit with the feature enabled depending on the part number. If this is the case my customer has been shipped the wrong kit and I need to go and enable the featureset. I presume with the kit a licence pack contains a key? I activate the key on the device, somehow but Cisco's documentation is all very high level and goes round in circles.
Cisco Asr 1001-x License
Thanks Chris. Chris, All Cisco ASR 1000 feature licenses are honor-based; that is, they are not enforced through a Product Activation Key (PAK) with the exception of the 'technology package licenses' and the performance upgrade license (from 2.5 to 5 Gbps) on the Cisco ASR 1001 models. What are the key new items introduced with the Cisco ASR 1001 chassis compared to the other ASR 1000 Series routers? The Cisco ASR 1001 Series introduces the concept of the integrated daughter card (IDC) which is a non-field upgradeable component on the ASR 1001 chassis to provide enhanced (I/O) capabilities. At the time of first customer ship (FCS), the Cisco ASR 1001 comes in 3 different versions: The ASR 1001 base chassis (Part number ASR1001), the ASR1001-2XOC3POS chassis with an integrated daughter card with 2 OC3 POS ports and the ASR1001-4XT3 with an integrated daughter card with 4 T3 ports. The second phase of the ASR 1001 launched a further 3 chassis: the ASR1001-HDD with built in 160GB hard drive; the ASR1001-4X1GE with an integrated daughter card providing 4 1GE ports; and the ASR1001-8XCHT1E1 with an integrated daughter card providing 8 channelized T1/E1 ports.
Further, the Cisco ASR 1001 is the first chassis of the Cisco ASR 1000 Series which implements the software activation which is the same software activation concept as seen on other Cisco offerings, e.g. On the Cisco ISR G2 router Series.
At FCS, 2 different type of licenses will be enforced via software activation. Firstly, the feature sets offered through the IP Base (K9 and non-K9), Advanced IP Services (K9 and non-K9) and Advanced Enterprise Services (K9 and non-K9). Secondly, the upgrade from the default performance of 2.5-Gbps to 5-Gbps can be accomplished via a software activated performance upgrade license (part number to be used at time of ordering any of the three ASR1001 chassis for the performance upgrade to 5-Gbps is FLS-ASR1001-5G). Other functionality such as firewall, encryption is planned to be software activated on the ASR 1001 in the future. How to activate a license once you have a PAK (Product Authorization Key): 1. Type the PAK you received on the form and submit it; 3. Activate the license on the ASR1000.
FAQ on For software activation commands, go to: HTH. Cheers, Gustavo. Thanks, so in summery; Customer should have the PAK code sent to them, I suspect in a large sealed pack I haven seen and ignored Register the PAK code @ Hopefully within an hour you should get a URL or the actual.LIC file in email registered to your cco account. Make the.lic file reachable on a tftp server.
Issue the commands on the IOS 'box' example - license install t Save the licence - license save flash:alllicenses.lic Some commands to check the licence; show license udi show license file show license detail show license status show license statistics Something like that, just preparing for my first on an ASR1001, doesnt seam that differant to the ASA's I mess with. Cheers everyone! Update: Ordering Cisco ASR 1000 Series Router Software: Cisco ASR 1001/ASR 1002-X Software With the Cisco ASR 1001 and ASR 1002-X, the concept of a universal software image in combination with a technology package license to enforce a certain feature set by software activation, that is, with a PAK, has been introduced.
Cisco Asr 1001 Datasheet
However, for ASR 1001, as of Cisco IOS XE Software Release 3.6S, technology package licenses, and as of 3.7S, performance upgrade license to upgrade from 2.5 to 5 Gbps, are both honor-based. For ASR 1002-X, both technology package licenses and performance upgrade licenses are honor-based. I am looking for a CCNP R+S certified Technical Service Engineer to come onboard at one of my client sites in Reading. You will be responsible for leading the technical relationship of one or more clients on a tactical day to day basis, liaising closely and supporting, where appropriate, strategic initiatives led by the client account team.
The following core technical skills are pre-requisites for the role: -. Experience diagnosing complex issues through packet capture analysis (Wireshark, tcpdump, snoop, Sniffer Pro). Hands on experience including but not limited to:. Cisco switches, routers and Firewalls. Juniper switches and routers. F5 Big-IP and Cisco ACE load balancers.
Check Point Firewalls. Palo Alto (can be taught) Monetary package is up to 70K (Bonus inclusive).